Previous Page  6 / 20 Next Page
Information
Show Menu
Previous Page 6 / 20 Next Page
Page Background

6

HYSS - HYBRID SOLAR SYSTEM

Hy

brid

S

olar

S

ystem

A new heating system powered by the sun – all year round

HYSS

The HYSS system makes possible the short-term storage of

solar energy underground. Even if the sun alone normally

cannot cover full heating requirements, HYSS creates the best

conditions for a marked improvement in heat pump efficiency

(COP). The solar heating is integrated with the heat pump right

from the start, and the system comprises also the storage of

solar heat underground – in either an energy well or a ground

loop. Other components of the system are an optimised storage

tank and an integrated control system. The user achieves good

operating economy without an excessively large investment.

The use of solar heating can be maximised by using a correctly

dimensioned number of solar panels, combined with the highly

efficient speed-controlled (inverter-controlled) heat pump. Even

during the winter, the solar heating will contribute by preheating

the incoming brine, resulting in higher efficiency of the heat-

pump and less power consumption. This gives a shorter

payback time for the heating system, since the solar panels are

used not only to produce hot water, but also to increase the

efficiency of the heat pump. Assembly and start-up of the

heating system are simple, and the user-friendly control system

makes HYSS a heating system that is truly “fit for use”,

supplying the full requirement for hot tap water and room

heating without additional sources of heat.

HYSS is delivered with integrated measurement equipment with

high accuracy. In this way, the user can continuously monitor

the performance of the system both in real time (COP) and

over longer periods of time (SCOP). The user can check at any

time that the system is actually delivering what the calculations

promised.

The system is connected to a webserver. This makes it possible

to carry out rapidly any necessary fault finding and repair, and

automatically ensures that the user always has the most recent

and best software.